D-Link DWL-3600AP Users Manual - Page 95

Unified Access Point Administrator's Guide Configuring Access Point Services Section 5: Configuring Access Point Services This section describes how to configure services on the UAP and contains the following subsections: • "Configuring SNMP on the Access Point" • "Web Server Settings" • "Setting the SSH Status" • "Setting the Telnet Status" • "Configuring Quality of Service" • "Configuring Email Alert" • "Enabling the Time Settings (NTP)" Configuring SNMP on the Access Point Simple Network Management Protocol (SNMP) defines a standard for recording, storing, and sharing information about network devices. SNMP facilitates network management, troubleshooting, and maintenance. The AP supports SNMP versions 1, 2, and 3. Unless specifically noted, all configuration parameters on this page apply to SNMPv1 and SNMPv2c only. Key components of any SNMP‐managed network are managed devices, SNMP agents, and a management system. The agents store data about their devices in Management Information Bases (MIBs) and return this data to the SNMP manager when requested. Managed devices can be network nodes such as APs, routers, switches, bridges, hubs, servers, or printers. The UAP can function as an SNMP managed device for seamless integration into network management systems such as HP OpenView. From the SNMP page under the Services heading, you can start or stop control of SNMP agents, configure community passwords, access MIBs, and configure SNMP Trap destinations. From the pages under the SNMPv3 heading, you can manage SNMPv3 users and their security levels and define access control to the SNMP MIBs. For information about how to configure SNMPv3 views, groups, users, and targets, see "Configuring SNMPv3" on page 111. To configure SNMP, click the SNMP tab under the Services heading and update the fields described in Table 36 on page 96 D-Link November 2011 Unified Access Point Administrator's Guide Page 95