Dell 962 All In One Photo Printer Dell™ Photo Printer 540 Owner's Ma - Page 32

www.dell.com | support.dell.com DEFAULT COUNTRY WAS NOT SET-If you did not select the default country during the setup process: 1 Click Menu → Printer Settings → Country. 2 Use the navigation arrow buttons until the desired country appears on the display, then press . 3 Use the navigation arrows and buttons to set your country as the default. CAMERA AND PRINTER DO NOT COMMUNICATE. Make sure camera is in the correct file transfer mode. See you camera Owner's Manual. General Problems ANYTIME YOUR PRINTER HAS A PROBLEM, MAKE SURE: • Your printer is on. • The photo paper is loaded correctly. For help, see "Loading the Photo Paper" on page 15. • Unplug the power supply from the electrical outlet. Reconnect the power supply (see your Setup Diagram). Turn the power on. IF YOUR PRINTER IS NOT ATTACHED TO A COMPUTER, MAKE SURE: • You read and follow any messages on the LCD. • The power supply is plugged into your printer and an electrical outlet. IF YOUR PRINTER IS ATTACHED TO A COMPUTER, MAKE SURE: • The USB cable is securely attached to your computer and to your printer. For help, see the Setting Up Your Printer poster. • Both your computer and your printer are on. • The Dell Photo Printer 540 is the selected printer. (It should not be set as the default if there is another printer connected.) • Restart your computer. If problems persist, see "Uninstalling and reinstalling the software" in your User's Guide. For help accessing your User's Guide, see page 11. Error Messages If an error occurs, the Error light glows amber and an error message is displayed on the printer LCD. Follow the directions on the LCD to resolve the problem. 32 Troubleshooting