Dell B2360d Mono Laser Printer User Guide - Page 139
Repeating defects appear on prints, Print is too dark, Step 1
View all Dell B2360d Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Troubleshooting 139 Repeating defects appear on prints Action Step 1 Measure the distance between the defects. Check for a distance between the defects that equals: • 97 mm (3.82 in.) • 47 mm (1.85 in.) • 38 mm (1.5 in.) Yes Go to step 2. Is the distance between defects equal to one of the listed measurements? Step 2 Replace the imaging unit, and then resend the print job. Contact technical support or your Dell printer dealer. Do the repeating defects still appear? No 1 Check if the distance between the defects equal to 80 mm (3.15 in.) 2 Take note of the distance, and then contact technical support or your Dell printer dealer. The problem is solved. Print is too dark Action Yes Step 1 Go to step 2. a From the Quality menu on the printer control panel, reduce the toner darkness. Note: 8 is the factory default setting. b Resend the print job. Is the print still too dark? No The problem is solved.