Dell B2360d Mono Laser Printer User Guide - Page 142
Skewed print, Step 6, Warning-Potential Damage
View all Dell B2360d Mono Laser Printer manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
Troubleshooting 142 Action Yes Step 6 Go to step 7. a Redistribute the toner in the imaging unit. 1 Remove the toner cartridge, and then the imaging unit. 2 Firmly shake the imaging unit. Warning-Potential Damage: Do not expose the imaging unit to direct light for more than 10 minutes. Extended exposure to light may cause print quality problems. 3 Install the imaging unit, and then the cartridge. b Resend the print job. Is the print still too light? Step 7 Replace the imaging unit, and then resend the print job. Contact technical support. Is the print still too light? No The problem is solved. The problem is solved. Skewed print AAABBBC)CCDDD)EEE Action Yes Step 1 Go to step 2. a Move the width and length guides in the tray to the correct positions for the size of the paper loaded. b Resend the print job. Is the print still skewed? Step 2 a Check if you are printing on a paper that is supported by the tray. b Resend the print job. Contact technical support. Is the print still skewed? No The problem is solved. The problem is solved.