Dell Dimension B110 Owner's Manual - Page 61
Front Panel - audio drivers
View all Dell Dimension B110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
3 Remove the securing screw from the card bracket. 4 Grasp the card by its top corners, and ease it out of its connector. 5 If you are removing the card permanently, install a filler bracket in the empty card-slot opening. If you need a filler bracket, contact Dell (see page 94). NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. The brackets also keep dust and dirt out of your computer. NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer. 6 Close the computer cover, reconnect the computer and devices to electrical outlets, and then turn them on. 7 Remove the card's driver from the operating system. 8 If you removed a sound card: a Enter system setup (see page 82), select Audio Controller, and then change the setting to On. b Connect external audio devices to the audio connectors on the computer back panel. 9 If you removed an add-in network connector: a Enter system setup (see page 82), select Network Controller, and then change the setting to On. b Connect the network cable to the integrated connector on the computer back panel. Front Panel CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover. Removing and Installing Parts 61