Dell Dimension B110 Owner's Manual - Page 68
Installing a Hard Drive
View all Dell Dimension B110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Installing a Hard Drive 1 Unpack the replacement hard drive, and prepare it for installation. 2 Check the documentation for the drive to verify that it is configured for your computer. 3 Remove the hard drive bracket (see page 66). 4 Attach the hard drive to the hard drive bracket: a Place the small bracket tabs into the drive screw holes on one side of the drive. b Gently swing the drive toward the bracket and align the two screw holes on the other side of the drive with the screw holes on the bracket. c Insert and tighten the two screws that secures the hard drive to the hard drive bracket. 5 Install the hard drive bracket containing the hard drive: a Insert the two bracket tabs into the two bracket securing slots inside the computer. b Rotate the bracket toward the front panel and align the bracket screw hole with the screw hole in the chassis. c Replace the two screws that secure the bracket to the computer. hard drive bracket tabs (2) drive bracket bracket screws (2) 68 Removing and Installing Parts