Dell Dimension B110 Owner's Manual - Page 90
Clearing Forgotten Passwords, After the Microsoft
View all Dell Dimension B110 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Clearing Forgotten Passwords CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. 1 Follow the procedures in "Before You Begin" on page 47. PSWRD 2 Locate the 3-pin password jumper (PSWD) on the system board (see page 54), and attach the jumper plug to pins 2 and 3 to clear the password. NOTE: When you receive your computer, the jumper plug is attached to pins 1 and 2. 3 Close the computer cover (see page 78). 4 Connect your computer and monitor to electrical outlets, and turn them on. 5 After the Microsoft® Windows® desktop appears on your computer, shut down the computer. (see page 47). 6 Turn off the monitor and disconnect it from the electrical outlet. 7 Disconnect the computer power cable from the electrical outlet, and press the power button to ground the system board. 8 Open the computer cover (see page 52). 9 Locate the 3-pin password jumper on the system board (see page 54) and attach the jumper to pins 1 and 2 to re-enable the password feature. 10 Replace the computer cover (see page 78). 90 Appendix