Dell Dimension XPS P60 MT Desktop Manual - Page 51
Computer Problems, The computer fails the POST
View all Dell Dimension XPS P60 MT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Computer Problems The computer fails the POST The Power On Self Test (POST) ensures that all hardware is working properly before starting the remainder of the boot process. If the computer passes the POST, the computer continues to start normally. However, if the computer fails the POST, the computer emits a series of beeps during start‑up. The following repetitive beep codes help you troubleshoot problems with your computer. For assistance, contact Alienware (see "CONTACTING ALIENWARE" on page 65). NOTE: To replace parts, see the Service Manual at support.dell.com/manuals. Beep Code One Two Three Four Five Six Seven Possible Problem Possible motherboard failure - BIOS ROM checksum failure No RAM detected NOTE: If you installed or replaced the memory module, ensure that the memory module is seated properly. Possible motherboard failure - Chipset error RAM read/write failure Real Time Clock failure Video card or chip failure Processor failure CHAPTER 5: TROUBLESHOOTING 49