Dell Force10 S50P FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series Tera - Page 113

show inventory (C-Series and E-Series) c e Display the chassis type, components (including media), FTOS version including hardware identification numbers and configured protocols. Syntax show inventory [media slot] Parameters media slot (OPTIONAL) Enter the keyword media followed by the slot number. C-Series Range: 0-7 E-Series Range: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on a E300 Defaults No default behavior or values Command Modes CONFIGURATION Command History Version 8.1.1.0 Version 7.8.1.0 Version 7.7.1.0 Version 7.5.1.0 Version 6.2.1.0 Version 5.3.1.0 Introduced on E-Series ExaScale Output expanded to include SFP+ media in C-Series. Vendor field removed from output of show inventory media. Introduced on C-Series and expanded to include transceiver media Expanded to include Software Protocol Configured field on E-Series Introduced on E-Series Usage Information The show inventory media command provides some details about installed pluggable media (SFP, XFP), as shown in Figure 5-25. Use the show interfaces command to get more details about installed pluggable media. The display output might include a double asterisk (**) next to the SFMs, for example: ... 0 CC-E-SFM ** 0004875 1 CC-E-SFM ** 0004889 ... 7490007411 A 7490007411 A The double asterisk generally indicates the SFM's frequency capabilities, indicating either that they are operating at 125 MHz or that the frequency capability, which is stored in an EPROM, cannot be determined. If there are no fiber ports in the line card, then just the header under show inventory media will be displayed. If there are fiber ports but no optics inserted, then the output will display "Media not present or accessible."C300 Example Control and Monitoring | 113