Dell Force10 S50P FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series Tera - Page 122
show memory C-Series and E-Series
View all Dell Force10 S50P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
www.dell.com | support.dell.com Table 5-2 defines the fields in Figure 5-31. Table 5-2. Descriptions for show linecard boot-information output Field # Status CurType Serial number Booted from Next boot Cache boot Boot flash Description Displays the line card slot numbers, beginning with slot 0. The number of slots listed is dependent on your chassis: E-Series: 0 to 13 on a E1200, 0 to 6 on a E600/E600i, and 0 to 5 on a E300. Indicates if a line card is online, offline, or booting. If a line card is not detected in the slot, a hyphen ( - ) is displayed. Displays the line card identification number, for example EXW4PF. Displays the line card serial number. Indicates whether the line card cache booted or system booted. In addition, the image with which the line card booted is also displayed. If the line card cache booted, then the output is A: or B: followed by the image in the flash partition (A: 6.5.1.4 or B: 6.5.1.4). If the line card system booted, then display is the current FTOS version number (6.5.1.4). Indicates if the next line card boot is a cache boot or system boot and which image will be used in the boot. Displays the system image in cache boot flash partition A: and B: for the line card. If the cache boot does not contain a valid image, "invalid" is displayed. Displays the two possible Boot flash versions. The [b] next to the version number is the current boot flash, that is the image used in the last boot. Usage The display area of this command uses the maximum 80 character length. If your display area is not set Information to 80 characters, the display will wrap. Related Commands show linecard upgrade (E-Series version) download alt-boot-image download alt-full-image download alt-system-image View the line card status Upgrade the boot flash, boot selector, or system image Download an alternate boot image to the chassis Download an alternate FTOS image to the chassis Download an alternate system image to the chassis show memory (C-Series and E-Series) c e View current memory usage on the system. Syntax show memory [cp | lp slot-number | rp1 | rp2] 122 | Control and Monitoring