Dell Force10 S50P FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series Tera - Page 1296
radius-server deadtime
View all Dell Force10 S50P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1296 highlights
www.dell.com | support.dell.com Parameters interface Enter the following keywords and slot/port or number information: • For an 100/1000 Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For Loopback interfaces, enter the keyword loopback followed by a number from zero (0) to 16838. • For the Null interface, enter the keywords null 0. • For a Port Channel interface, enter the keyword port-channel followed by a number: C-Series and S-Series Range: 1-128 E-Series Range: 1 to 32 for EtherScale, 1 to 255 for TeraScale and 1 to 512 for ExaScale. • For a SONET interface, enter the keyword sonet followed by the slot/port information. • For a Ten Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For VLAN interface, enter the keyword vlan followed by a number from 1 to 4094. Defaults Not configured. Command Mode CONFIGURATION Command History Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.2.1.1 Support added for S-Series Support added for C-Series Introduced on E-Series radius-server deadtime c e s Configure a time interval during which non-responsive RADIUS servers to authentication requests are skipped. Syntax radius-server deadtime seconds To disable this function or return to the default value, enter no radius-server deadtime. Parameters seconds Enter a number of seconds during which non-responsive RADIUS servers are skipped. Range: 0 to 2147483647 seconds. Default: 0 seconds. Defaults 0 seconds Command Modes CONFIGURATION Command History Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced for S-Series Introduced for C-Series Introduced for E-Series 1296 | Security