Dell Force10 S50P FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series Tera - Page 660

www.dell.com | support.dell.com Syntax Command Modes Command History Related Commands show arp retries EXEC EXEC Privilege Version 8.3.1.0 arp retries Introduced Set the number of ARP retries in case the system does not receive an ARP reply in response to an ARP request. show hosts c e s View the host table and DNS configuration. Syntax show hosts Command Modes EXEC EXEC Privilege Command History Version 8.1.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on E-Series ExaScale Introduced on S-Series Introduced on C-Series Introduced for E-Series Example Figure 24-9. show hosts Command Example FTOS#show hosts Default domain is not set Name/address lookup uses static mappings Name servers are not set Host Flags TTL -------- ----- ---- ks (perm, OK) - 4200-1 (perm, OK) - 1230-3 (perm, OK) - ZZr (perm, OK) - Z10-3 (perm, OK) - FTOS# Type ---- IP IP IP IP IP Address ------2.2.2.2 192.68.69.2 192.68.99.2 192.71.18.2 192.71.23.1 Table 24-6. show hosts Command Example Fields Field Default domain... Name/address lookup... Name servers are... Host Description Displays the domain name (if configured). States if DNS is enabled on the system. If DNS is enabled, the Name/Address lookup is domain service. If DNS is not enabled, the Name/Address lookup is static mapping. Lists the name servers, if configured. Displays the host name assigned to the IP address. 660 | IPv4 Routing