Dell Force10 S50P FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series Tera - Page 1139
show power supply
View all Dell Force10 S50P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1139 highlights
Example FTOS(conf-if-range-gi-0/1-48)#do show power inline Interface Admin Inline Power Inline Power Class Allocated Consumed (Watts) (Watts) Gi 0/1 auto 0.00 0.00 NO_DEVICE Gi 0/2 auto 7.00 3.20 2 User Priority ---------Low Low Table 43-2. show power inline Command Output Field Description Interface Displays the line card slot and port number. Admin Displays the PoE mode of the port. The mode can be either auto or static. See power budget. Inline Power Allocated Inline Power Consumed Displays the amount of power allocated to the port. Displays the amount of power that is consumed by the connected device. Class User Priority Displays the power classification of the connected device. Valid classes are 0-4. Displays the power configured by the user for the port (default is low). See power inline priority. Related Commands power inline power inline priority Enable power to be supplied to a device connected to a port. Set the PoE priority of the selected port show power supply c s Display the power supply status. Syntax show power supply Command Modes EXEC EXEC Privilege Command History Version 7.7.1.0 Version 7.5.1.0 Introduced on S-Series Introduced on C-Series C-Series Example Figure 43-1. show power supply (C-Series) Command Example FTOS#show power supply Power Model Supply Number Type Status PEM0 Absent PEM1 Absent PEM2 CC-C-1200W-AC AC Active PEM3 Absent PEM4 CC-C-1200W-AC AC Powered Off PEM5 CC-C-1200W-AC AC Active FTOS# Power over Ethernet (PoE) | 1139