Dell Force10 S50P FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series Tera - Page 213
ip access-list standard
View all Dell Force10 S50P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
Usage The order option is relevant in the context of the Policy QoS feature only. See the "Quality of Information Service" chapter of the FTOS Configuration Guide for more information. When you use the log option, CP processor logs details about the packets that match. Depending on how many packets match the log entry and at what rate, the CP may become busy as it has to log these packets' details. The monitor option is relevant in the context of flow-based monitoring only. See the Chapter 44, Port Monitoring. The C-Series and S-Series cannot count both packets and bytes, so when you enter the count byte options, only bytes are incremented. Note: When ACL logging and byte counters are configured simultaneously, byte counters may display an incorrect value. Configure packet counters with logging instead. Related Commands ip access-list standard permit Configure a standard ACL. Configure a permit filter. ip access-list standard c e s Create a standard IP access list (IP ACL) to filter based on IP address. Syntax ip access-list standard access-list-name Parameters access-list-name Enter a string up to 140 characters long as the ACL name. Defaults All IP access lists contain an implicit "deny any," that is, if no match occurs, the packet is dropped. Command Modes CONFIGURATION Command History Version 8.1.1.0 Version 7.8.1.0 Version 7.6.1.0 Version 7.5.1.0 Version 7.4.1.0 Version 6.5.1.0 Introduced on E-Series ExaScale Increased name string to accept up to 140 characters. Prior to 7.8.1.0, names are up to 16 characters long. Added support for S-Series Added support for C-Series Added support for non-contiguous mask and added the monitor option. Expanded to include the optional QoS order priority for the ACL entry. Usage Information FTOS supports one ingress and one egress IP ACL per interface. Prior to 7.8.1.0, names are up to 16 characters long. The number of entries allowed per ACL is hardware-dependent. Refer to your line card documentation for detailed specification on entries allowed per ACL. Access Control Lists (ACL) | 213