Dell Force10 S50P FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series Tera - Page 530

www.dell.com | support.dell.com Parameters fixed normal forbidden Enter the keyword fixed followed by the VLAN range in a comma separated VLAN ID set. Enter the keyword normal followed by the VLAN range in a comma separated VLAN ID set. This is the default Enter the keyword forbidden followed by the VLAN range in a comma separated VLAN ID set. Defaults Default registration is normal Command Modes CONFIGURATION-INTERFACE Command History Version 7.6.1.0 Introduced on C, E, and S-Series Usage Information The fixed registration prevents an interface, configured via the command line to belong to a VLAN (static configuration), from being un-configured when it receives a Leave message. Therefore, the registration mode on that interface is fixed. The normal registration is the default registration. The port's membership in the VLANs depends on GVRP. The interface becomes a member of VLANs after learning about the VLAN through GVRP. If the VLAN is removed from the port that sends GVRP advertisements to this device, then the port will stop being a member of the VLAN. The forbidden is used when you do not want the interface to advertise or learn about VLANs through GVRP. Related Commands show gvrp Display the GVRP configuration including the registration protocol gvrp c e s Access GVRP protocol - (config-gvrp)#. Syntax protocol gvrp Defaults Disabled Command Modes CONFIGURATION Command History Related Commands Version 7.6.1.0 Introduced on C, E, and S-Series disable Globally disable GVRP. show config c e s Display the global GVRP configuration. Syntax show config 530 | GARP VLAN Registration (GVRP)