Dell Force10 S50P FTOS Command Line Reference Guide FTOS 8.4.2.7 E-Series Tera - Page 673
show ip route all Command Example, show ip route summary and show ip
View all Dell Force10 S50P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 673 highlights
Command Modes EXEC EXEC Privilege Command History Version 8.1.1.0 Version 7.9.1.0 Version 7.6.1.0 Version 7.5.1.0 pre-Version 6.1.1.0 Introduced on E-Series ExaScale Introduced VRF on the E-Series Introduced on S-Series Introduced on C-Series Introduced for E-Series Example Figure 24-20. show ip route all Command Example FTOS#show ip route all Codes: C - connected, S - static, R - RIP B - BGP, IN - internal BGP, EX - external BGP, LO - Locally Originated O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1 N2 - OSPF NSSA external type 2, E1 - OSPF external type 1 E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1 L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default > - non-active route + - summary route Gateway of last resort is not set Destination ----------R 3.0.0.0/8 C > R C > R FTOS# 100.10.10.0/24 100.10.10.0/24 101.10.10.0/24 101.10.10.0/24 Gateway ------via 100.10.10.10, So 2/8 via 101.10.10.10, So 2/9 Direct, So 2/8 Direct, So 2/8 Direct, So 2/9 Direct, So 2/9 Dist/Metric Last Change 120/1 00:07:12 0/0 120/0 0/0 120/0 00:08:54 00:08:54 00:09:15 00:09:15 Example Figure 24-21. show ip route summary and show ip route static Command Examples FTOS#show ip route summary Route Source Active Routes Non-active Routes connected 2 0 static 1 0 Total 3 0 Total 3 active route(s) using 612 bytes R1_E600i>show ip route static ? | Pipe through a command R1_E600i>show ip route static Destination Gateway Dist/Metric Last Change ----------- ------- *S 0.0.0.0/0 via 10.10.91.9, Gi 1/2 1/0 3d2h FTOS> IPv4 Routing | 673