Dell G5 5090 Service Manual - Page 17
-inch hard drive, Removing the 2.5-inch hard drive
View all Dell G5 5090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Steps 1. Place the computer in an upright position. 2. Connect the front-LED cable to the connector on the front cover. 3. Align the front-cover tabs with the slots on the chassis. 4. Rotate the front cover towards the chassis and snap it into place. Next steps 1. Install the left-side cover. 2. Follow the procedure in After working inside your computer. 2.5-inch hard drive Removing the 2.5-inch hard drive Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the left-side cover. About this task The following images indicate the location of the 2.5-inch hard-drive assembly and provides a visual representation of the removal procedure. Removing and installing components 17
Steps
1.
Place the computer in an upright position.
2.
Connect the front-LED cable to the connector on the front cover.
3.
Align the front-cover tabs with the slots on the chassis.
4.
Rotate the front cover towards the chassis and snap it into place.
Next steps
1.
Install the
left-side cover
.
2.
Follow the procedure in
After working inside your computer
.
2.5-inch hard drive
Removing the 2.5-inch hard drive
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
left-side cover
.
About this task
The following images indicate the location of the 2.5-inch hard-drive assembly and provides a visual representation of the removal
procedure.
Removing and installing components
17