Dell G5 5090 Service Manual - Page 32
Dell G5 5090 Manual
View all Dell G5 5090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Steps 1. Locate the notch on the solid-state drive/Intel Optane. 2. Align the notch on the solid-state drive/Intel Optane with the tab on the M.2 card slot. 3. Slide the solid-state drive/Intel Optane into the M.2 card slot on the system board. 4. Replace the screw (M2x3) that secures the solid-state drive/Intel Optane to the system board. Next steps 1. Install the graphics card. 2. Install the left-side cover. 3. Follow the procedure in After working inside your computer. NOTE: Enable the Intel Optane memory after you replace the Intel Optane memory module. For more information about enabling the Intel Optane memory, see Enabling Intel Optane. 32 Removing and installing components
Steps
1.
Locate the notch on the solid-state drive/Intel Optane.
2.
Align the notch on the solid-state drive/Intel Optane with the tab on the M.2 card slot.
3.
Slide the solid-state drive/Intel Optane into the M.2 card slot on the system board.
4.
Replace the screw (M2x3) that secures the solid-state drive/Intel Optane to the system board.
Next steps
1.
Install the
graphics card
.
2.
Install the
left-side cover
.
3.
Follow the procedure in
After working inside your computer
.
NOTE:
Enable the Intel Optane memory after you replace the Intel Optane memory module. For more information
about enabling the Intel Optane memory, see
Enabling Intel Optane
.
32
Removing and installing components