Dell G5 5090 Service Manual - Page 47
LED daughter board, Removing the LED daughter board
View all Dell G5 5090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Steps 1. Align and place the VR heat sink on the system board. 2. Tighten the captive screws that secure the VR heat sink to the system board. Next steps 1. Install the left-side cover. 2. Follow the procedure in After working inside your computer. LED daughter board Removing the LED daughter board Prerequisites 1. Follow the procedure in Before working inside your computer. 2. Remove the left-side cover. About this task The following images indicate the location of the LED daughter board and provides a visual representation of the removal procedure. Removing and installing components 47
Steps
1.
Align and place the VR heat sink on the system board.
2.
Tighten the captive screws that secure the VR heat sink to the system board.
Next steps
1.
Install the
left-side cover
.
2.
Follow the procedure in
After working inside your computer
.
LED daughter board
Removing the LED daughter board
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
2.
Remove the
left-side cover
.
About this task
The following images indicate the location of the LED daughter board and provides a visual representation of the removal procedure.
Removing and installing components
47