Dell G5 5090 Service Manual - Page 69
Clearing BIOS (System Setup) and System passwords
View all Dell G5 5090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Steps 1. Remove the left-side cover. 2. Remove the graphics card. 3. Remove the jumper plug from the password jumper-pins (PSWD) and connect it to the CMOS jumper-pins. 4. Wait for 5 seconds and then replace the jumper plug to its original location. 5. Install the graphics card. 6. Install the left-side cover. Clearing BIOS (System Setup) and System passwords About this task CAUTION: Clearing CMOS settings will reset the BIOS settings on your computer. Steps 1. Remove the left-side cover. 2. Remove the graphics card. 3. Remove the jumper plug from the password jumper-pins (PSWD). 4. Wait for 5 seconds and then replace the jumper plug to its original location. System setup 69
Steps
1.
Remove the
left-side cover
.
2.
Remove the
graphics card
.
3.
Remove the jumper plug from the password jumper-pins (PSWD) and connect it to the CMOS jumper-pins.
4.
Wait for 5 seconds and then replace the jumper plug to its original location.
5.
Install the
graphics card
.
6.
Install the
left-side cover
.
Clearing BIOS (System Setup) and System passwords
About this task
CAUTION:
Clearing CMOS settings will reset the BIOS settings on your computer.
Steps
1.
Remove the
left-side cover
.
2.
Remove the
graphics card
.
3.
Remove the jumper plug from the password jumper-pins (PSWD).
4.
Wait for 5 seconds and then replace the jumper plug to its original location.
System setup
69