Dell G5 5090 Service Manual - Page 34
Installing the graphics card
View all Dell G5 5090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
4. Push the securing tabs on the graphics-card support bracket and rotate to remove it off the chassis. 5. Lift the pull tab to open the PCIE door. 6. Push and hold the securing tab on the graphics-card slot and lift the graphics card from the graphics-card slot. NOTE: To remove the NVIDIA GeForce RTX 2080 graphics card, lift and rotate the graphics card. Installing the graphics card Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the graphics card and provides a visual representation of the installation procedure. Steps 1. Align the graphics card with the PCI-Express card connector on the system board. NOTE: To install the NVIDIA GeForce RTX 2080 graphics card, rotate and install the graphics card. 2. Using the alignment post, connect the card in the connector and press down firmly. Ensure that the card is firmly seated. 34 Removing and installing components