Dell G5 5090 Service Manual - Page 44
Installing the processor
![]() |
View all Dell G5 5090 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
CAUTION: When removing the processor, do not touch any of the pins inside the socket or allow any objects to fall on the pins in the socket. 3. Gently lift the processor from the processor socket. Installing the processor Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the processor and provides a visual representation of the installation procedure. Steps 1. Ensure that the release lever on the processor socket is fully extended in the open position. NOTE: The pin-1 corner of the processor has a triangle that aligns with the triangle on the pin-1 corner on the processor socket. When the processor is properly seated, all four corners are aligned at the same height. If one or more corners of the processor are higher than the others, the processor is not seated properly. 44 Removing and installing components
![](/manual_guide/products/dell-g5-5090-service-manual-4dc239a/44.png)