Dell G5 5090 Service Manual - Page 41

Processor fan and heat-sink assembly

Get Dell G5 5090 PDF manuals and user guides View all Dell G5 5090 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

3. Install the left-side cover. 4. Follow the procedure in After working inside your computer. Processor fan and heat-sink assembly Removing the processor fan and heat-sink assembly Prerequisites 1. Follow the procedure in Before working inside your computer. NOTE: The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before you touch it. CAUTION: For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in your skin can reduce the heat transfer capability of the thermal grease. 2. Remove the left-side cover. About this task The following images indicate the location of the processor fan and heat-sink assembly and provides a visual representation of the removal procedure. Steps 1. Disconnect the processor-fan cable from the system board. 2. In the reverse sequential order (4->3->2->1), loosen the captive screws that secure the processor fan and heat-sink assembly to the system board. 3. Lift the processor fan and heat-sink assembly off the system board. Removing and installing components 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
3.
Install the
left-side cover
.
4.
Follow the procedure in
After working inside your computer
.
Processor fan and heat-sink assembly
Removing the processor fan and heat-sink assembly
Prerequisites
1.
Follow the procedure in
Before working inside your computer
.
NOTE:
The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before
you touch it.
CAUTION:
For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in
your skin can reduce the heat transfer capability of the thermal grease.
2.
Remove the
left-side cover
.
About this task
The following images indicate the location of the processor fan and heat-sink assembly and provides a visual representation of the removal
procedure.
Steps
1.
Disconnect the processor-fan cable from the system board.
2.
In the reverse sequential order (4->3->2->1), loosen the captive screws that secure the processor fan and heat-sink assembly to the
system board.
3.
Lift the processor fan and heat-sink assembly off the system board.
Removing and installing components
41