Dell GX260 Service Manual - Page 50
Connect the other end of the floppy-drive cable to the connector labeled DSKT on the system board.
UPC - 683728163389
View all Dell GX260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Installing a Floppy Drive 1. If the replacement drive does not have the bracket rails attached, see step 2 in the previous section for instructions on attaching rails. 2. Gently slide the drive into place until the tabs securely click into position. 3. Attach the power and floppy-drive cables to the floppy drive. 4. Connect the other end of the floppy-drive cable to the connector labeled DSKT on the system board. Attaching Power and Drive Cables 1 power cable 2 floppy-drive cable
Installing a Floppy Drive
1. If the replacement drive does not have the bracket rails attached, see
step 2
in the previous section for instructions on
attaching rails.
2. Gently slide the drive into place until the tabs securely click into position.
3. Attach the power and floppy-drive cables to the floppy drive.
4. Connect the other end of the floppy-drive cable to the connector labeled DSKT on the system board.
Attaching Power and Drive Cables
1
power cable
2
floppy-drive cable