Dell Inspiron 2650 User Guide - Page 128
Removing the Display Bezel, Removing the 14-Inch Display Panel
View all Dell Inspiron 2650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Display Assembly and Display Latch: Dell Inspiron 2600 and 2650 1 screw covers (5) 6 M2 x 3-mm screws (4) 2 M2.5 x 5-mm screws 7 M2.5 x 5-mm screw (1) (5) 3 display bezel 8 display-feed flex cable 4 display panel 9 flex-cable retention bracket 5 M2.5 x 5-mm screws 10 top cover (2) Removing the Display Bezel NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed battery. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure. 1. Remove the keyboard. 2. Remove the display assembly. 3. Use a plastic scribe to pry the five screw covers out of the screw holes located on the front of the bezel. 4. Remove the five M2.5 x 5-mm screws located on the front of the bezel. NOTICE: Carefully separate the bezel from the top cover to avoid damage to the bezel. 5. Starting at the bottom of the display panel (by the Dell™ logo), use your fingers to separate the bezel from the top cover by lifting the inside of the bezel while pushing in on the outside. Removing the 14-Inch Display Panel NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed battery. file:///F|/Service%20Manuals/Dell/Inspiron/2600-50/display.htm (5 of 14) [2/28/2004 6:52:43 AM]