Dell Inspiron 2650 User Guide - Page 129
Remove the M2.5 x 5-mm screw that secures the display-feed flex cable to the display
View all Dell Inspiron 2650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 129 highlights
Display Assembly and Display Latch: Dell Inspiron 2600 and 2650 NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. NOTICE: Read "Preparing to Work Inside the Computer" before performing the following procedure. 1. Remove the keyboard. 2. Remove the display assembly. 3. Remove the display bezel. 4. Remove the two M2 x 3-mm screws on the left side of the display panel. 5. Remove the two M2 x 3-mm screws on the right side of the display panel. 6. Remove the M2.5 x 5-mm screw that secures the display-feed flex cable to the display assembly. 7. Unsnap the flex-cable retention bracket from the top cover, and lift the bracket out of the display assembly. 1 flex-cable retention bracket 8. Lift the display panel from the top, and rotate the display panel out of the top cover. file:///F|/Service%20Manuals/Dell/Inspiron/2600-50/display.htm (6 of 14) [2/28/2004 6:52:43 AM]