Dell Inspiron 2650 User Guide - Page 135
Display Latch, Removing the Display Latch
View all Dell Inspiron 2650 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 135 highlights
Display Assembly and Display Latch: Dell Inspiron 2600 and 2650 1 pull tabs 2 inverter connector on system board 3 bottom flex-cable connector 10. Pull the top flex-cable connector down and away to remove it from the display panel connector. Replacing the 15-Inch Display Panel 1. Reconnect the top flex-cable connector to the display panel connector. 2. Reconnect the bottom flex-cable connector to the inverter connector on the system board. 3. Replace the tape that secures the display panel connector and the tape that secures the middle of the display-feed flex cable to the display panel. 4. Place the bottom edge of the display panel in the bottom of the top cover and elevate the top of the panel with your hand. 5. Lay the display panel in the top cover. 6. Reinstall the eight M2 x 3-mm screws that secure the display panel to the top cover. 7. Reinstall the M2.5 x 5-mm screw that secures the display-feed flex cable to the display assembly. Display Latch NOTICE: Disconnect the computer and any attached devices from electrical outlets, and remove any installed battery. NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching an unpainted metal surface on the computer. Removing the Display Latch 1. Remove the keyboard. file:///F|/Service%20Manuals/Dell/Inspiron/2600-50/display.htm (12 of 14) [2/28/2004 6:52:43 AM]