Dell OptiPlex 3000 Micro Micro Service Manual - Page 14
Front bezel, Removing the front bezel
View all Dell OptiPlex 3000 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
2. Slide the side cover towards the back of the system to install it. 3. Tighten the thumbscrew (6x32) to secure the side cover to the system. Next steps 1. Follow the procedure in after working inside your computer. Front bezel Removing the front bezel Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. About this task The following images indicate the location of the front bezel and provide a visual representation of the removal procedure. Steps 1. Pry the retention tabs to release the front bezel from the system. 2. Remove the front bezel from the system. 14 Removing and installing components
2.
Slide the side cover towards the back of the system to install it.
3.
Tighten the thumbscrew (6x32) to secure the side cover to the system.
Next steps
1.
Follow the procedure in
after working inside your computer
.
Front bezel
Removing the front bezel
Prerequisites
1.
Follow the procedure in
before working inside your computer
.
2.
Remove the
side cover
.
About this task
The following images indicate the location of the front bezel and provide a visual representation of the removal procedure.
Steps
1.
Pry the retention tabs to release the front bezel from the system.
2.
Remove the front bezel from the system.
14
Removing and installing components