Dell OptiPlex 3000 Micro Micro Service Manual - Page 41
When the processor is fully seated in the socket, close the processor cover.
View all Dell OptiPlex 3000 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Steps 1. Align the pin-1 corner of the processor with the pin 1 corner of the processor socket, and then place the processor in the processor socket. NOTE: The pin-1 corner of the processor has a triangle that aligns with the triangle on the pin-1 corner on the processor socket. When the processor is properly seated, all four corners are aligned at the same height. If one or more corners of the processor are higher than the others, the processor is not seated properly. 2. When the processor is fully seated in the socket, close the processor cover. 3. Press down and push the release lever under the securing tab to lock it. Next steps 1. Install the heat sink. 2. Install the fan assembly. 3. Install the speaker. 4. Install the side cover. 5. Follow the procedure in after working inside your computer. Removing and installing components 41