Dell OptiPlex 3000 Micro Micro Service Manual - Page 22
Installing the hard-drive assembly
View all Dell OptiPlex 3000 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Steps 1. Place the hard-drive into the bracket. 2. Align and insert the pins on the drive bracket with the slots on the drive. NOTE: Note the orientation of the hard-drive so that you can replace it correctly. Next steps 1. Install the hard-drive assembly. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Installing the hard-drive assembly Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following image indicates the location of the hard-drive assembly and provides a visual representation of the installation procedure. 22 Removing and installing components
Steps
1.
Place the hard-drive into the bracket.
2.
Align and insert the pins on the drive bracket with the slots on the drive.
NOTE:
Note the orientation of the hard-drive so that you can replace it correctly.
Next steps
1.
Install the
hard-drive assembly
.
2.
Install the
side cover
.
3.
Follow the procedure in
after working inside your computer
.
Installing the hard-drive assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following image indicates the location of the hard-drive assembly and provides a visual representation of the installation
procedure.
22
Removing and installing components