Dell OptiPlex 3000 Micro Micro Service Manual - Page 31
Steps, Next steps, Install
View all Dell OptiPlex 3000 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
Steps 1. Align the screws of the heat sink with the holders on the system board and place the heat sink on the processor. 2. Tighten the captive screws that secure the heat sink to the system board. NOTE: Tighten the screws in a sequential order (1,2,3) as printed on the heat sink. Next steps 1. Install the fan assembly. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Removing and installing components 31
Steps
1.
Align the screws of the heat sink with the holders on the system board and place the heat sink on the processor.
2.
Tighten the captive screws that secure the heat sink to the system board.
NOTE:
Tighten the screws in a sequential order (1,2,3) as printed on the heat sink.
Next steps
1.
Install the
fan assembly
.
2.
Install the
side cover
.
3.
Follow the procedure in
after working inside your computer
.
Removing and installing components
31