Dell OptiPlex 3000 Micro Micro Service Manual - Page 29
Heat sink
View all Dell OptiPlex 3000 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Steps 1. Connect the fan cable to the connector on the system board. 2. Turn the fan assembly over. 3. Press the release tab on the fan assembly and place it on the system until it clicks into place. Next steps 1. Install the speaker. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Heat sink NOTE: This section applies to 35 W and 65 W configuration systems. Removing and installing components 29
Steps
1.
Connect the fan cable to the connector on the system board.
2.
Turn the fan assembly over.
3.
Press the release tab on the fan assembly and place it on the system until it clicks into place.
Next steps
1.
Install the
speaker
.
2.
Install the
side cover
.
3.
Follow the procedure in
after working inside your computer
.
Heat sink
NOTE:
This section applies to 35 W and 65 W configuration systems.
Removing and installing components
29