Dell OptiPlex 3000 Micro Micro Service Manual - Page 17
Removing the M.2 2280 PCIe solid-state drive, Steps, Next steps, Prerequisites, About this task
View all Dell OptiPlex 3000 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Steps 1. Align the notch on the solid-state drive with the tab on the solid-state drive connector on the system board. 2. Insert the solid-state drive at a 45-degree angle into the solid-state drive connector. 3. Replace the screw (M2x3.5) that secures the M.2 2230 PCIe solid-state drive to the system board. Next steps 1. Install the hard-drive assembly. 2. Install the side cover. 3. Follow the procedure in after working inside your computer. Removing the M.2 2280 PCIe solid-state drive Prerequisites 1. Follow the procedure in before working inside your computer. 2. Remove the side cover. 3. Remove the hard-drive assembly. About this task The following images indicate the location of the solid-state drive and provide a visual representation of the removal procedure. Removing and installing components 17