Dell OptiPlex 3000 Micro Micro Service Manual - Page 27
Installing the fan assembly
View all Dell OptiPlex 3000 Micro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Steps 1. Press the blue tabs on both sides of the fan, and slide to lift the fan to release it from the system. 2. Turn the fan assembly over. 3. Disconnect the fan cable from the connector on the system board. Lift the fan assembly out of the system. Installing the fan assembly Prerequisites If you are replacing a component, remove the existing component before performing the installation procedure. About this task The following images indicate the location of the fan assembly and provide a visual representation of the removal procedure. Removing and installing components 27
Steps
1.
Press the blue tabs on both sides of the fan, and slide to lift the fan to release it from the system.
2.
Turn the fan assembly over.
3.
Disconnect the fan cable from the connector on the system board. Lift the fan assembly out of the system.
Installing the fan assembly
Prerequisites
If you are replacing a component, remove the existing component before performing the installation procedure.
About this task
The following images indicate the location of the fan assembly and provide a visual representation of the removal procedure.
Removing and installing components
27