Dell OptiPlex 7010 Owner's Manual (Mini-Tower) - Page 13

Installing the Memory, Removing the Coin-Cell Battery, Installing the Coin-Cell Battery

Get Dell OptiPlex 7010 PDF manuals and user guides View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

Installing the Memory 1. Align the notch on the memory-card with the tab in the system-board connector. 2. Press down on the memory module until the release tabs spring back to secure them in place. 3. Install the cover. 4. Follow the procedures in After Working Inside Your Computer. Removing the Coin-Cell Battery 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover. 3. Locate the coin-cell battery on the system board. 4. Remove the expansion card(s). 5. Carefully press the release latch away from the battery to allow the battery to pop up from the socket and lift the coin-cell battery out of the computer. Installing the Coin-Cell Battery 1. Place the coin cell battery into its slot on the system board. 2. Press the coin cell battery downward until the release latch springs back into place and secures it. 3. Install the expansion card. 4. Install the cover. 5. Follow the procedures in After Working Inside Your Computer. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
Installing the Memory
1.
Align the notch on the memory-card with the tab in the system-board connector.
2.
Press down on the memory module until the release tabs spring back to secure them in place.
3.
Install the cover.
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Coin-Cell Battery
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Locate the coin-cell battery on the system board.
4.
Remove the expansion card(s).
5.
Carefully press the release latch away from the battery to allow the battery to pop up from the socket and lift the
coin-cell battery out of the computer.
Installing the Coin-Cell Battery
1.
Place the coin cell battery into its slot on the system board.
2.
Press the coin cell battery downward until the release latch springs back into place and secures it.
3.
Install the expansion card.
4.
Install the cover.
5.
Follow the procedures in
After Working Inside Your Computer
.
13