Dell OptiPlex 7010 Owner's Manual (Mini-Tower) - Page 30
Installing the Input/Output Panel, Removing the System Board
View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
7. Slide the I/O panel towards the left of the computer to release it and pull the I/O panel along with its cable out of the computer. Installing the Input/Output Panel 1. Insert the I/O panel into the slot on the chassis front. 2. Slide the I/O panel towards the right of the computer to secure to the chassis. 3. Use a Phillips screwdriver to tighten the single screw securing the I/O panel to the chassis. 4. Thread the I/O panel and FlyWire cables into the chassis clip. 5. Connect the I/O panel and FlyWire cables to the system board. 6. Install the front panel. 7. Install the cover. 8. Follow the procedures in After Working Inside Your Computer. Removing the System Board 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the: a) cover 30