Dell OptiPlex 7010 Owner's Manual (Mini-Tower) - Page 28
Installing the Power Switch, Removing the Input/Output (I/O) Panel
View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
6. Slide the power switch along with its cable out through the front of the computer. Installing the Power Switch 1. Slide the power switch in through the front of the computer. 2. Secure the power-switch cable to the chassis. 3. Thread the power-switch cable into the chassis clips. 4. Connect the power-switch cable to the system board. 5. Install the: a) optical drive b) front panel c) cover 6. Follow the procedures in After Working Inside Your Computer. Removing the Input/Output (I/O) Panel 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover. 3. Remove the front panel. 28
6.
Slide the power switch along with its cable out through the front of the computer.
Installing the Power Switch
1.
Slide the power switch in through the front of the computer.
2.
Secure the power-switch cable to the chassis.
3.
Thread the power-switch cable into the chassis clips.
4.
Connect the power-switch cable to the system board.
5.
Install the:
a)
optical drive
b)
front panel
c)
cover
6.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Input/Output (I/O) Panel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Remove the front panel.
28