Dell OptiPlex 7010 Owner's Manual (Mini-Tower) - Page 24
Installing the System Fan, Removing the Thermal Sensor
View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
4. Pry and remove the system fan away from the four grommets securing it to the back of the computer. Installing the System Fan 1. Place the chassis fan in the chassis. 2. Pass the four grommets through the chassis and slide outward along the groove to secure in place. 3. Connect the fan cable to the system board. 4. Install the cover. 5. Follow the procedures in After Working Inside Your Computer. Removing the Thermal Sensor 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover. 24
4.
Pry and remove the system fan away from the four grommets securing it to the back of the computer.
Installing the System Fan
1.
Place the chassis fan in the chassis.
2.
Pass the four grommets through the chassis and slide outward along the groove to secure in place.
3.
Connect the fan cable to the system board.
4.
Install the cover.
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Thermal Sensor
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
24