Dell OptiPlex 7010 Owner's Manual (Mini-Tower) - Page 9
Installing the Intrusion Switch, Removing the Front Bezel, After Working Inside Your Computer
View all Dell OptiPlex 7010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Installing the Intrusion Switch 1. Insert the intrusion switch into its place in the chassis rear and slide it towards the top to secure it. 2. Connect the intrusion cable to the system board. 3. Install the cover. 4. Follow the procedures in After Working Inside Your Computer. Removing the Front Bezel 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove the cover. 3. Gently pry the front panel retention clips away from the chassis located at the edge of front panel. 9
Installing the Intrusion Switch
1.
Insert the intrusion switch into its place in the chassis rear and slide it towards the top to secure it.
2.
Connect the intrusion cable to the system board.
3.
Install the cover.
4.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Front Bezel
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the cover.
3.
Gently pry the front panel retention clips away from the chassis located at the edge of front panel.
9