Dell OptiPlex GX240 User's Guide - Page 136
Diskette Drive
View all Dell OptiPlex GX240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
www.dell.com | support.dell.com 1 connector notch 2 interposer board alignment hole 3 floppy-drive cable 4 lever 7 Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents. 8 Close the computer cover, reconnect your computer and devices to their electrical outlets, and turn them on. 9 Enter system setup and update the appropriate Diskette Drive A option to reflect the size and capacity of your new floppy drive. 10 Verify that your computer works correctly by running the Dell Diagnostics. Small Desktop and Small Mini-Tower Computers 1 If the replacement drive does not have the bracket rails attached, remove the rails from the old drive by removing the two screws that secure each rail to the drive. Attach the bracket to the new drive by aligning the screw holes on the drive with the screw holes on the bracket rails and tightening all four screws (two screws on each rail). Floppy Drive Bracket Rails 1 2 3 134 Installing Upgrades