Dell OptiPlex GX240 User's Guide - Page 72
If you are replacing an expansion card, remove the current driver
View all Dell OptiPlex GX240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
www.dell.com | support.dell.com NOTICE: Before disconnecting a device from the computer, wait 10 to 20 seconds after disconnecting the computer from its electrical outlet. Before removing a component from the system board, verify that the standby power light on the system board has turned off. To locate this light, see "System Board Components." 1 If you are replacing an expansion card, remove the current driver for the expansion card from the operating system. 2 Turn off the computer and devices, disconnect them from their electrical outlets, and wait 10 to 20 seconds. 3 Open the computer cover. 4 If you have a small desktop computer, remove the expansion-card cage. 70 Installing Upgrades
70
Installing Upgrades
www.dell.com | support.dell.com
NOTICE:
Before disconnecting a device from the computer, wait 10 to 20
seconds after disconnecting the computer from its electrical outlet. Before
removing a component from the system board, verify that the standby power
light on the system board has turned off. To locate this light, see “
System
Board Components
.”
1
If you are replacing an expansion card, remove the current driver for
the expansion card from the operating system.
2
Turn off the computer and devices, disconnect them from their
electrical outlets, and wait 10 to 20 seconds.
3
Open the computer cover
.
4
If you have a small desktop computer,
remove the expansion-card cage
.