Dell PowerConnect W Clearpass 100 Software Cisco WLC Integration Guide - Page 6
Cisco WLC Configuration
View all Dell PowerConnect W Clearpass 100 Software manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Cisco WLC Configuration The following configuration procedure assumes that the Cisco WLC has been powered up and a basic IP configuration has been applied through the CLI to allow the Administrator to access the Web User Interface. The following table reviews the IP Addressing used in the example environment. This should be replaced with the site specific configuration information of each customer deployment: Cisco WLC Address Internet Gateway Address Amigopod IP Address Amigopod RADIUS port DHCP Server Client DHCP Range 10.51.1.234 10.51.0.1 10.162.110.13 Auth 1812 Acc 1813 (default settings) 10.51.0.10 10.51.1.1-128 Note: In this particular guide, we use the management interface as our WLAN interface. In an actual deployment, oftentimes you'll find a specific interface/VLAN created and designated for use with the Guest WLAN. These will be deployment specific details and the WLC configuration will need to be adjusted to accommodate the desired deployment configuration. CONFIDENTIAL 6