Dell PowerConnect W-Series FIPS Dell PowerConnect W-600 Controller Series Secu - Page 32

 Never insert foreign objects into the chassis, the power supply, or any other component, even when the power supplies have been turned off, unplugged, or removed.  Main power is fully disconnected from the switch only by unplugging all power cords from their power outlets. For safety reasons, make sure the power outlets and plugs are within easy reach of the operator.  Do not handle electrical cables that are not insulated. This includes any network cables.  Keep water and other fluids away from the product.  Comply with electrical grounding standards during all phases of installation and operation of the product. Do not allow the switch chassis, network ports, power supplies, or mounting brackets to contact any device, cable, object, or person attached to a different electrical ground. Also, never connect the device to external storm grounding sources.  Installation or removal of the chassis or any module must be performed in a static-free environment. The proper use of anti-static body straps and mats is strongly recommended.  Keep modules in anti-static packaging when not installed in the chassis.  Do not ship or store this product near strong electromagnetic, electrostatic, magnetic or radioactive fields.  Do not disassemble chassis or modules. They have no internal user-serviceable parts. When service or repair is needed, contact Aruba Networks. The Security Kit The Aruba Mobility Controller FIPS 140-2 Level 2 Security Kit modifies the standard Aruba Mobility Controller hardware, firmware, and documentation to assure FIPS 140-2 Level 2 validation. Product Examination The Crypto Officer receives the switch in a carton. The Crypto Officer should examine the carton for evidence of tampering. Tamper-evidence includes tears, scratches, and other irregularities in the packaging. Package Contents The product carton should include the following:  Aruba 620 and 650 Mobility Controller  Rack/tabletop mounting kit  Aruba User Documentation CD  Tamper-Evident Labels Tamper-Evident Labels Aruba provides double the required amount of Tamper-Evident Labels (TELs), if a customer requires replacement TELs, please call customer support and Aruba will provide the appropriate TELs for your model free of charge. After testing, the Crypto Officer must apply Tamper-Evident Labels (TELs) to the switch. When applied properly, the TELs allow the Crypto Officer to detect the opening of the chassis cover, the removal or replacement of modules or cover plates, or physical access to restricted ports. Vendor provides FIPS 140 designated TELs which have met the physical security testing requirements for tamper evident labels under the FIPS 140-2 Standard. TELs are not endorsed by the Cryptographic Module Validation Program (CMVP). 30 | Installing the Controller Aruba 620, 650 and Dell W-620, W-650 | FIPS 140-2 Level 2 Release Supplement