Dell PowerConnect W-Series FIPS Dell PowerConnect W-600 Controller Series Secu - Page 8

Physical Description, Dimensions, Cryptographic Module Boundaries, Aruba 620 Chassis

Page 8 highlights

 Dell W-620  Aruba 650 (650-AOS-STD-FIPS-US)  Dell W-650  The exact firmware versions tested were:  ArubaOS_6xx_6.1.2.3-FIPS  Dell_PCW_6xx_6.1.2.3-FIPS Physical Description See "Aruba 620 Chassis" on page 8 or "Aruba 650 Chassis" on page 12for a list of what ships with this product. Dimensions The Aruba 620 Mobility Controller has the following physical dimensions:  Size:  Width 12.6" (320 mm)  Height 1.75" (45 mm)  Depth 6.8" (173 mm)  Weight: 2.7 lbs/1.23 kgs The 620 Rack Mounting Kit provides the means to install a 620 controller in a standard 19-inch rack. The Aruba 650 Mobility Controller has the following physical dimensions:  Size:  Width 13.6" (346 mm)  Height 1.5" (38 mm)  Depth 8.9" (226 mm)  Weight: 4.9 lbs/2.2 kgs The Aruba 650 Mobility Controller is rack mountable in a standard 19-inch rack. Cryptographic Module Boundaries For FIPS 140-2 Level 2 validation, the Mobility Controller has been validated as a multi-chip standalone cryptographic module. The chassis physically encloses the complete set of hardware and firmware components and represents the cryptographic boundary of the switch. The cryptographic boundary is defined as encompassing the top, front, left, right, rear, and bottom surfaces of the case. Aruba 620 Chassis The Aruba 620 Mobility Controller chassis is designed to be 1U not-modular. The following diagrams (Figure 1 and Figure 2) show the front and rear view of the chassis respectively. The Aruba 620 Mobility Controller chassis contains:  1x Console (RS-232) RJ-45 port  4xFast Ethernet (10/100BASE-T) port  4x Fast Ethernet (10/100BASE-T) with PoE+ port  1x Gigabit Ethernet (1000BASE-T) port  1x ExpressCard® port 8 | The Aruba 620 and 650 Mobility Controllers Aruba 620, 650 and Dell W-620, W-650 | FIPS 140-2 Level 2 Release Supplement

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

8
|
The Aruba 620 and 650 Mobility Controllers
Aruba 620, 650 and Dell W-620, W-650
|
FIPS 140-2 Level 2 Release Supplement
Dell W-620
Aruba 650 (650-AOS-STD-FIPS-US)
Dell W-650
The exact firmware versions tested were:
ArubaOS_6xx_6.1.2.3-FIPS
Dell_PCW_6xx_6.1.2.3-FIPS
Physical Description
See
“Aruba 620 Chassis” on page 8
or
“Aruba 650 Chassis” on page 12
for a list of what ships with this
product.
Dimensions
The Aruba 620 Mobility Controller has the following physical dimensions:
Size:
Width 12.6" (320 mm)
Height 1.75" (45 mm)
Depth 6.8" (173 mm)
Weight:
2.7 lbs/1.23 kgs
The 620 Rack Mounting Kit provides the means to install a 620 controller in a standard 19-inch rack.
The Aruba 650 Mobility Controller has the following physical dimensions:
Size:
Width 13.6" (346 mm)
Height 1.5" (38 mm)
Depth 8.9" (226 mm)
Weight:
4.9 lbs/2.2 kgs
The Aruba 650 Mobility Controller is rack mountable in a standard 19-inch rack.
Cryptographic Module Boundaries
For FIPS 140-2 Level 2 validation, the Mobility Controller has been validated as a multi-chip standalone
cryptographic module. The chassis physically encloses the complete set of hardware and firmware
components and represents the cryptographic boundary of the switch. The cryptographic boundary is
defined as encompassing the top, front, left, right, rear, and bottom surfaces of the case.
Aruba 620 Chassis
The Aruba 620 Mobility Controller chassis is designed to be 1U not-modular. The following diagrams
(
Figure 1
and
Figure 2
) show the front and rear view of the chassis respectively. The Aruba 620 Mobility
Controller chassis contains:
1x Console (RS-232) RJ-45 port
4xFast Ethernet (10/100BASE-T) port
4x Fast Ethernet (10/100BASE-T) with PoE+ port
1x Gigabit Ethernet (1000BASE-T) port
1x ExpressCard® port