Dell PowerEdge M420 Dell PowerEdge M420 Systems Owner's Manual - Page 101
BIOS detected an error configuring the Intel Trusted Execution Technology TXT.
View all Dell PowerEdge M420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Error Code Message Information RFM2004 Message Failure detected on Internal Dual SD Module . LCD Message Internal Dual SD Module failed. Check SD Card. Details The SD card module is installed but improperly configured or failed to initialize. Action Reinstall the SD module and remove and reinstall SD cards. RFM2006 Message Details Action Internal Dual SD Module is write protected. The module is write-protected. Changes may not be written to the media. If unintended, remove the media and disable write protection. SEC0003 Message The processor area is open. Details The processor area is open. A drive may be added or removed. System performance may be degraded. Action Close the processor area. Check system logs. SEC0004 Message Details Action The LAN is disconnected. The LAN is disconnected. Network performance may be degraded. If unintentional, connect network cable. SEC0040 Message Details Action A critical stop occurred during OS load. Operating system generated critical stop IPMI event. (Sensor type code = 20H) Check video and operating system logs for additional information SEC0041 Message LCD Message Details Action BIOS detected an error configuring the Intel Trusted Execution Technology (TXT). BIOS detected an error configuring TXT. Check system configuration. TXT initialization failure. System configuration may have changed. Check system hardware inventory and software configuration. SEC0042 Message Processor detected an error while performing an Intel Trusted Execution Technology (TXT) operation. LCD Message CPU detected an error while performing a TXT operation. Check system configuration. Details TXT CPU microcode boot failure. System configuration may have changed. Action Check system hardware inventory and software configuration. SEC0043 Message BIOS Authenticated Code Module detected an Intel Trusted Execution Technology (TXT) error during POST. LCD Message BIOS detected a TXT error during POST. Check system configuration. 101