Dell PowerEdge M420 Dell PowerEdge M420 Systems Owner's Manual - Page 104
Invalid boot sector found., Chassis management controller CMC redundancy is degraded.
View all Dell PowerEdge M420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Error Code Message Information Details Action System setup displays the system boot order. The local video screen may also show additional information. (IPMI sensor type code 1eh - offset 00h). Check system boot settings. Check if mass storage controller configuration settings are applicable. SEL1302 Message Non-bootable diskette detected. Details The disk in the drive is not formatted correctly or does not contain the necessary operating system files. Action Replace diskette with a bootable disk. SEL1304 Message Details Action The PXE server not found. PXE is one way to boot a system from the network. Check the network and PXE server configuration. SEL1306 Message Invalid boot sector found. Details The disk in the drive is not formatted correctly or does not contain the necessary operating system files. Action Replace diskette with a bootable disk. SEL1308 Message A time-out occurred while waiting for user to select a boot source. Details The system has failed to boot to an operating system and needs the user to select a boot source. Action Select boot source within the time allowed. SEL1501 Message Chassis management controller (CMC) redundancy is lost. Details An action or failure has taken place that breaks CMC redundancy. Action Check the CMC network cables and network connections. Check that CMC firmware versions match. SEL1502 Message Chassis management controller (CMC) redundancy is degraded. Details An action or failure has taken place that breaks CMC redundancy. Action Check the CMC network cables and network connections. Check that CMC firmware versions match. SEL1504 Message The chassis management controller (CMC) is not redundant. Insufficient resources to maintain normal operations. Details There is not enough available power for two CMC's to operate. Action Check the overall power consumption and power status. 104