Dell PowerEdge M420 Dell PowerEdge M420 Systems Owner's Manual - Page 78
Check chassis fabric type in CMC GUI and compare to the type of IOM or mezzanine card.
View all Dell PowerEdge M420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
Error Code Message Information HWC1009 Message The backplane is absent. LCD Message The backplane is absent. Check hardware. Details The backplane may be necessary for proper operation. System functionality may be degraded. Action If removal was unintended, check presence, then reinstall or reconnect. HWC1010 Message Action The backplane is disabled. If disabled unexpectedly, re-enable backplane. HWC1015 Message The mezzanine card is absent. Details The mezzanine card may be necessary for proper operation. System functionality may be degraded. Action If removal was unintended, check presence, then reinstall or reconnect. HWC2006 Message The is not installed correctly. LCD Message The is not installed correctly. Check connection. Details The device may be necessary for proper operation. System functionality may be degraded. Action Check presence, then re-install or reconnect. HWC2008 Message A fabric mismatch detected between IOM and mezzanine card . Details The fabric type for the IOM and mezzanine cards must match. Action Check chassis fabric type in CMC GUI and compare to the type of IOM or mezzanine card. HWC2011 Message The riser board cable or interconnect is not connected, or is improperly connected. LCD Message Riser board cable or interconnect failure. Check connection. Details The riser blade cable may be necessary for proper operation. System functionality may be degraded Action Check the riser board or interconnect presence, then reinstall or reconnect. HWC3000 Message The is removed. Details The removed device may be necessary for proper operation. System functionality may be degraded. Action If removal was unintended, check presence of the removed device, then reinstall or reconnect HWC3002 Message Server is removed. 78