Dell PowerEdge M420 Dell PowerEdge M420 Systems Owner's Manual - Page 28

Inside The Blade, I/O Module Mezzanine Card, Mezzanine Card Installation Guidelines

Get Dell PowerEdge M420 PDF manuals and user guides View all Dell PowerEdge M420 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

Inside The Blade Figure 7. Inside the Blade 1. blade system board release handle 2. mezzanine card blank 3. processor/DIMM blank 4. LOM riser card connector 5. heat sink (for processor 1) 6. memory modules (3) (for processor 2) 7. SSD backplane 8. solid state drives (2) 9. SD card 1 slot 10. SD vFlash card/SD card 2 slot 11. processor 2 socket 12. memory modules (3) (for processor 1) 13. optional mezzanine card (Fabric B or C) 14. mezzanine card release latch I/O Module Mezzanine Card Mezzanine Card Installation Guidelines • The blade supports one SFF mezzanine card. • The mezzanine card slot supports Fabric B or Fabric C, depending on the slot in the sleeve where the blade is installed. This card must match the fabric type of the I/O modules installed in the corresponding I/O module bays. NOTE: For more information on I/O modules, see "Guidelines for Installing I/O Modules" in the M1000e Enclosure Owner's Manual at support.dell.com/manuals. 28

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
Inside The Blade
Figure 7. Inside the Blade
1.
blade system board release handle
2.
mezzanine card blank
3.
processor/DIMM blank
4.
LOM riser card connector
5.
heat sink (for processor 1)
6.
memory modules (3) (for processor 2)
7.
SSD backplane
8.
solid state drives (2)
9.
SD card 1 slot
10.
SD vFlash card/SD card 2 slot
11.
processor 2 socket
12.
memory modules (3) (for processor 1)
13.
optional mezzanine card (Fabric B or C)
14.
mezzanine card release latch
I/O Module Mezzanine Card
Mezzanine Card Installation Guidelines
•
The blade supports one SFF mezzanine card.
•
The mezzanine card slot supports Fabric B or Fabric C, depending on the slot in the sleeve where the blade is
installed. This card must match the fabric type of the I/O modules installed in the corresponding I/O module
bays.
NOTE:
For more information on I/O modules, see "Guidelines for Installing I/O Modules" in the
M1000e Enclosure
Owner's Manual
at
support.dell.com/manuals
.
28