Dell PowerEdge M420 Dell PowerEdge M420 Systems Owner's Manual - Page 79
Link Tuning error detected., CMC has old firmware.
View all Dell PowerEdge M420 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
Error Code Message Information Action If removal was unintended, check presence of the server, then reinsert. HWC3004 Message Action IO module is removed. If removal was unintended, check presence of the IO module, then reinsert. HWC4000 Message A hardware incompatibility detected between BMC/iDRAC firmware and CPU. LCD Message Incompatibility between BMC/iDRAC firmware and CPU. Update firmware. Details A hardware incompatibility was detected between BMC/iDRAC firmware and Processor(s). An iDRAC or BMC firmware update is needed. Action Update the BMC/iDRAC firmware. If the issue persists, see Getting Help. HWC4002 Message A hardware incompatibility detected between BMC/iDRAC firmware and other hardware. Details A hardware incompatibility was detected between BMC/iDRAC firmware and other hardware. An iDRAC or BMC firmware update is needed. Action Update the BMC/iDRAC firmware. If the issue persists, see Getting Help. HWC4011 Message Hardware unsuccessfully updated for mezzanine card . Action Check presence of the hardware, reinstall or reconnect, then reattempt the update. If the issue persists, see Getting Help. HWC4013 Message Hardware unsuccessfully updated for embedded NIC. Action Check presence, reinstall or reconnect, then reattempt the update. If the issue persists, see Getting Help. HWC4015 Message Details Action Link Tuning error detected. CMC has old firmware. After updating the firmware the CMC will recognize the device. Update the CMC firmware. If the issue persists, see Getting Help. HWC5001 Message Action is offline. If unexpected, check presence, then reinstall or reconnect. HWC5002 Message A fabric mismatch detected on . Details The fabric type for the IOM and mezzanine cards must match. Action Check chassis fabric type in CMC GUI and compare to the type of IOM or mezzanine card. HWC5004 Message Details A link tuning failure detected on . CMC has old firmware. After updating the firmware the CMC will recognize the device. 79