Dell Precision R7610 Dell Precision Workstation R7610 Owner's Manual - Page 83
Removing the Power-Distribution Unit
View all Dell Precision R7610 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
37 Removing the Power-Distribution Unit 1. Follow the procedures in Before Working Inside Your Computer. 2. Remove: - front bezel - cover - cooling shroud - power supply - system fans - fan bracket 3. Slide the front chassis assembly forward. 4. Disconnect the optical drive power connector and the SAS backplane connector by pressing the notch on each individual connector and pulling them in an outward direction. 5. Disconnect the CPU 1, CPU 2 power connectors, CPU 1, CPU 2 memory power connectors, power-distribution unit connector and the 24-pin connector from the system board. 83
37
Removing the Power-Distribution Unit
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove:
–
front bezel
–
cover
–
cooling shroud
–
power supply
–
system fans
–
fan bracket
3.
Slide the front chassis assembly forward.
4.
Disconnect the optical drive power connector and the SAS backplane connector by pressing the notch on each
individual connector and pulling them in an outward direction.
5.
Disconnect the CPU 1, CPU 2 power connectors, CPU 1, CPU 2 memory power connectors, power-distribution unit
connector and the 24–pin connector from the system board.
83